 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS SURFACE MOUNT 3.3V LVPECL CLOCK ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7.0 UNITS C Vdc TABLE 1.0 NOTE FPLA554G DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 10KHz offset (Fo) MINIMUM 44.736 -15 0 3.135 NOMINAL 3.3 -60 -90 -100 -125 -135 MAXIMUM 200 15 70 3.465 60 5 1 UNITS MHz ppm C Vdc mA pS RMS pS RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz TABLE 2.0 NOTE 1 (Vcc) (Icc) The Connor-Winfield FPLA554G is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a 15ppm overall stability. Operating at 3.3V supply voltage, the FPLA554G provides LVPECL Differential Outputs with enable/disable function. INPUT CHARACTERISTICS PARAMETER Disable Input Voltage (High) Enable Input Voltage (Low) (Vih) (Vil) MINIMUM 2.275 NOMINAL TABLE 3.0 FEATURES 3.3V OPERATION ENABLE/DISABLE FUNCTION - MAXIMUM 1.68 UNITS Vdc Vdc NOTE 2 2 TABLE 4.0 PECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS NOTE 3 LVPECL DIFFERENTIAL OUTPUTS LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: 15PPM TEMPERATURE RANGE: 0 to 70C Duty Cycle Rise / Fall Time 20% to 80% 4 PACKAG E CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. TABLE 6.0 The component solder used internal to this device has a melting point of 221C. The peak temperature inside the device should be less than or equal to 220C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT PROCESS RECOMMENDATIONS Solder Reflow Wash ORDERING INFORMATION Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc - 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V FPLA554G - 155.52MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec223 PAGE 1 OF 2 REV: 00 DATE: 01/12/06 aCopyright 2001 Connor-Winfield all rights reserved. CW 0602 FPLA554G 155.52M THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Pin 1 2 3 4 5 6 7 8 9 10 TABLE 6.0 Connection N/C Enable / Disable N/C Ground N/C Q Output Q Output N/C Vcc N/C CW 0602 FPLA554G 155.52M Dimensional Tolerance: .005 (.127mm) OUTPUT WAVEFORM SUGGESTED PAD LAYOUT "1" LEVEL "0" LEVEL Solder Profile Temperature 260C 260C 220C 180C 150C 120C ENABLE/ DISABLE 0 120 S Max. 10 S 60 S Max. 360 Sec. Max. Time Specifications subject to change without notice. DATA SHEET #: Ec223 PAGE 2 OF 2 REV: 00 DATE: 01/12/06 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of FPLA554G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |